How to get ipw2200 and wpa to work

1) Open a terminal window and type:

Code:

wpa_passphrase your_ssid your_psk

Note: your_ssid is the name of your wireless network (a.k.a. SSID) and your_psk is the password you want to use to protect your network. (Look below for an example).

2) Now copy the psk string you got as output.

3) Type:

Code:

sudo gedit /etc/wpa_supplicant.conf

Then paste this as follow:

Code:

ctrl_interface=/var/run/wpa_supplicant
#ap_scan=2

network={
     ssid="your_ssid"
     scan_ssid=1
     proto=WPA RSN
     key_mgmt=WPA-PSK
     pairwise=CCMP TKIP
     group=CCMP TKIP
     psk=your_psk
}

Note: your_psk is the psk string you got from step 1.

Here is an example:

Code:

luca@laptop1:~$ wpa_passphrase mywlan thisisthepassword
network={
      ssid="mywlan"
      #psk="thisisthepassword"
      psk=b22ec921c254c73f99b31b76ff876692ecde36839a1f2d92150829e6afcb5515
}

The red string is what you have to paste into /etc/wpa_supplicant.conf as your_psk (without quotes obviously). So you'll have something like this:

Code:

ctrl_interface=/var/run/wpa_supplicant
#ap_scan=2

network={
     ssid="mywlan"
     scan_ssid=1
     proto=WPA RSN
     key_mgmt=WPA-PSK
     pairwise=CCMP TKIP
     group=CCMP TKIP
     psk=b22ec921c254c73f99b31b76ff876692ecde36839a1f2d92150829e6afcb5515

4) Save the file and close Gedit.

5) Now we have to make wpa_supplicant load when system boots, so go back to the terminal window and type:

Code:

sudo gedit /etc/network/interfaces

6) Add the following lines in the part regarding your wireless card, as in the example below:

Code:

pre-up wpa_supplicant -Bw -Dwext -ieth0 -c/etc/wpa_supplicant.conf
post-down killall -q wpa_supplicant

Note: "eth0" is your wireless device and "wext" is the driver; this is a kind of generic driver, so it should work with most wireless cards. If it doesn't, please try another driver, such as hostap, ndiswrapper, etc.
Here is an example:

Code:

iface eth0 inet static
address 192.168.1.15
netmask 255.255.255.0
wireless-essid my_essid
gateway 192.168.1.1
pre-up wpa_supplicant -Bw -Dwext -ieth0 -c/etc/wpa_supplicant.conf
post-down killall -q wpa_supplicant

7) Now run wpa_supplicant:

Code:

sudo wpa_supplicant -Bw -Dwext -i eth0 -c/etc/wpa_supplicant.conf

You should be online!



Troubleshooting:

You can run wpa_supplicant with -dd flag for a detailed debug output.

1) If you don't manage to connect to the AccessPoint, try to uncomment line 2 in /etc/wpa_supplicant.conf.
2) If that doesn't help, try change its value to 0 or 1.
3) If you get troubles while authenticating, try removing "RSN" and/or "CCMP" strings from /etc/wpa_supplicant.conf.

source: http://www.ubuntuforums.org/showthread.php?t=263136

How to enable WPA with Ndiswrapper driver

First, make sure the Ndiswrapper driver works by itself without encryption.

Create a file called /etc/wpa_supplicant.conf, and paste in the following. Modify the ssid and psk values.

ctrl_interface=/var/run/wpa_supplicant
network={
  ssid="YourWiFiSSID"
  psk="YourWiFiPassword"
  key_mgmt=WPA-PSK
  proto=WPA
  pairwise=TKIP
}

• Test it. Make sure your router is broadcasting its SSID.

sudo wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf -dd

• If your WPA works. Load it automatically when you reboot.

gksudo gedit /etc/network/interfaces

• Change your wlan0 section to the following.

If you are using static IP:

auto wlan0
iface wlan0 inet static
address 192.168.1.20
netmask 255.255.255.0
gateway 192.168.1.1
pre-up wpa_supplicant -Bw -Dwext -iwlan0 -c/etc/wpa_supplicant.conf
post-down killall -q wpa_supplicant

or this, if you are using dhcp.

auto wlan0
iface wlan0 inet dhcp
pre-up wpa_supplicant -Bw -Dwext -iwlan0 -c/etc/wpa_supplicant.conf
post-down killall -q wpa_supplicant

• Reboot